Second Skin Audio UK

Rattle Pad

Rattle Pad is a very effective barrier and absorber composite designed to absorb the rattles between the cars plastic trim and metal panels. Rattle pad is a semi open, semi closed cell acoustical foam treated with a black polyurethane coating on each side.

Once installed, the cushion it creates between panels not only kills rattles, but also helps reduce road noise, engine noise and exhaust noise within the cabin of your car. Rattle Pad also helps keep the music in the car and unwanted noise out. Perfect for under the carpet, on top of headliner and behind upholstery.

Use On:

Roof, Trim Panels

* Adheres To:

	Painted or Primed Sheet Metal
	Plastic
	Existing OEM Sound Deadener
	Damplifier™
	Spectrum™
* requires separate adhesive - not included

Specs:

Thickness	.375 in	(9.52 mm)
Mass/Area	.079 lbs/Sq.Ft.	(.386 kg/m²)
Heat Tolerance	212 °F	(100 °C)
Sheets	24inX54in	(60.96cmX137.16cm)

Luxury Liner

Luxury Liner is a highly effective barrier and absorber mat consisting of a vinyl barrier and acoustical grade open cell foam. Luxury Liner is designed to go on top of vibration dampers to reflect the sound waves that make it in to the cars cabin.

As unwanted sound waves pass through the foam they are absorbed and reduced. Any sound waves that then hit the vinyl barrier reflect back to the foam which reduces those remaining sound waves even further. Luxury Liner is the next level of luxury sound comfort. When used with a vibration damper, any car can be made as quiet as a brand new luxury car.

Use On:

Rear Shelf & Boot, Floor, Firewall

* Adheres To:

	Painted or Primed Sheet Metal
	Plastic
	Existing OEM Sound Deadener
	Damplifier™
	Spectrum™
* requires separate adhesive - not included

Specs:

Thickness	.375 in	(9.52 mm)
Mass/Area	1 lbs/Sq.Ft.	(4.88 kg/m²)
Heat Tolerance	250 °F	(121 °C)
Sheets	24inX54in	(60.96cmX137.16cm)

Motor Mat

Second Skin Motor Mat is a high temperature heat barrier and hood liner made of an acoustic grade, semi open, and semi closed cell foam with aluminum facing reinforced with fiberglass cross-threads. Motor Mat has a high temperature, peel and stick acrylic adhesive for easy and permanent installation.

Motor Mat is designed to reflect radiant heat from the engine, transmission and exhaust. Apply Motor Mat to the engine side of the firewall to reflect heat away from the cabin of the car and reduce engine noise inside the vehicle. When applied on the bonnet, Motor Mat will help reduce engine noise and protect the paint on the cars bonnet.

Use On:

Bonnet

Adheres To:

	Painted or Primed Sheet Metal
	Plastic
	Existing OEM Sound Deadener
	Damplifier™
	Spectrum™

Specs:

Thickness	.5 in	(12.7 mm)
Mass/Area	.079 lbs/Sq.Ft.	(.386 kg/m²)
Heat Tolerance	212 °F	(100 °C)
Sheets	36inX54in	(91.44cmX137.16cm)

Overkill

Overkill can be considered the little brother of the Second Skin acoustical barrier, Luxury Liner. Overkill is an extremely durable and light weight closed cell neoprene sponge used for reducing airborne sound waves. Overkill acts as thin, lightweight barrier that reflects, absorbs and reduces various frequencies associated with road noise, engine noise and loud exhaust systems.

Overkill is designed to be placed on top of vibration dampers on the floor, rear shelf, headliner, and firewall. It can also be placed between plastic trim and sheet metal panels to keep rattling and buzzing to an inaudible minimum. Measuring in at 1/8 inch thick it is perfect under carpet or behind upholstery panels.

Use On:

Doors, Rear Shelf & Boot, Roof, Floor, Trim Panels, Quarter Panels

* Adheres To:

	Painted or Primed Sheet Metal
	Plastic
	Existing OEM Sound Deadener
	Damplifier™
	Spectrum™
* requires separate adhesive - not included

Specs:

Thickness	.125 in	(3.17 mm)
Mass/Area	.013 lbs/Sq.Ft.	(.061 kg/m²)
Heat Tolerance	225 °F	(107 °C)
Sheets	46inX72in	(116.84cmX182.88cm)